UruOs-50 Industrial High Pressure Atomizing Humidification with Built-in RO System
Features
Mineral ingredient (calcium, magnesium and etc.) is in the water, and when spraying water in the air, it’s separated out as mineral dust (powder). Hard water has high mineral ingredient contents, and the phenomenon is found conspicuously. Electronic parts, precision mechanical equipment, a computer room, printed paper surface coating and food industry are required special care in particular. There is also a possibility which causes a nozzle clogging by this mineral ingredient. The high pressure humidification system with built-in RO membrane filtration system can remove 99% of mineral ingredient and spray the deionized water.
Specifications
Description of Product | High Pressure Humidification System with Built-in RO System |
---|---|
Model | UruOs-50RO |
Humidification Capacity | Min10L/h ~ Max50L/h |
Humidity Indication and Setting | Digital Display and Setting (0~100%) |
Humidity Detection | Semiconductor Humidity Sensor |
Control Method | Two-step Spraying Duration Control |
Pressurized Pump | 0.5KW 50/60Hz |
Sterilization Function | UV Sterilization Device (Standard Equipment) |
RO System | Cartridge Type RO Filter (6 pcs) |
RO Processing Capacity | Approx. 90L/h (At 25℃/ Using 6 PCS) Approx. 56L/h (At 10℃/ Using 6 PCS) |
Power Supply | 3-phase 200V, Approx. 4.0A, Approx. 1.4KVA |
Dimensions | W550xD550xH1085mm |
*Detection and protective function are the same specification as UruOs-50.
Residual chlorine contained in tap water affects deionized water generation of RO system. Installation of an activated carbon filter is highly recommended to extend lifetime of RO filters.
Estimated Timing for Exchange of Filters
- 1 μ filtration filter (L500) … Every 6 Months
- Activated Carbon Filter (L500) … Every 6 Months
- Cartridge Type RO Filter … Once a Year (6 Filters Simultaneous Exchange)