Product

UruOs-50 Industrial High Pressure Atomizing Humidification with Built-in RO System

Features

UruOs-50RO High Pressure Humidification System with Built-in RO System

Mineral ingredient (calcium, magnesium and etc.) is in the water, and when spraying water in the air, it’s separated out as mineral dust (powder). Hard water has high mineral ingredient contents, and the phenomenon is found conspicuously. Electronic parts, precision mechanical equipment, a computer room, printed paper surface coating and food industry are required special care in particular. There is also a possibility which causes a nozzle clogging by this mineral ingredient. The high pressure humidification system with built-in RO membrane filtration system can remove 99% of mineral ingredient and spray the deionized water.

Catalog Download Inquiry Form

Specifications

Description of Product High Pressure Humidification System with Built-in RO System
Model UruOs-50RO
Humidification Capacity Min10L/h ~ Max50L/h
Humidity Indication and Setting Digital Display and Setting (0~100%)
Humidity Detection Semiconductor Humidity Sensor
Control Method Two-step Spraying Duration Control
Pressurized Pump 0.5KW 50/60Hz
Sterilization Function UV Sterilization Device (Standard Equipment)
RO System Cartridge Type RO Filter (6 pcs)
RO Processing Capacity Approx. 90L/h (At 25℃/ Using 6 PCS)
Approx. 56L/h (At 10℃/ Using 6 PCS)
Power Supply 3-phase 200V, Approx. 4.0A, Approx. 1.4KVA
Dimensions W550xD550xH1085mm

*Detection and protective function are the same specification as UruOs-50.

Residual chlorine contained in tap water affects deionized water generation of RO system. Installation of an activated carbon filter is highly recommended to extend lifetime of RO filters.

Estimated Timing for Exchange of Filters

  • 1 μ filtration filter (L500) … Every 6 Months
  • Activated Carbon Filter (L500) … Every 6 Months
  • Cartridge Type RO Filter … Once a Year (6 Filters Simultaneous Exchange)