Dampening Solution Recirculation Systems
The printing method of offset printing uses rebounding of ink and water, and the water used is called dampening solution. Thermal management and ingredient management are very important for this dampening solution, and it also affects printing quality. A dampening solution recirculation system is the equipment which keeps ingredient and temperature of dampening solution constant in order to perform high-quality printing, and circulates dampening solution to a printing press.
TOP-ONE ECO series is the product which collected experience and technology of COSMOTECH. It is equipment of the energy-saving type which has standard adoption of the refrigerant gas of R407C.
TOP-ONE ECO 402
TOP-ONE ECO 402
Customer-delighting functions were added to simplicity and compactness of TOP-ONE ECO 402s.
TOP-ONE ECO 402 has automatic injection of etch and IPA.
Operation status can be recognized quickly on the touch screen and it is also convenient for settings.
Features
- Stable cooling ability by adopting low vibration chiller.
- Simple and easily viewable operation portion.
- Equipped filter bags which minimize foaming and rid impurities effectively.
- Adopt eco-friendly refrigerant (R407C)
- Cleaning/ maintenance of the reservoir is every easy.
- Compact design to minimize installation space.
- Automatic injection of etch and IPA
- Touch screen operation
Specifications
Name | TOP-ONE ECO 402 |
---|---|
Power Supply | 3-Phase 200V Input Breaker 20A |
Current/ Capacity | Approx. 12A/ 4.2kVA |
Refrigerator | Air Cooling Type 1.62kW |
Refrigerant | R407C |
Circulation Pump | 3-Phase 200V 370W |
Water Supply | Automatic Water Supply |
IPA Control | alcon |
Dimensions | W600×D750×H1200 (mm) |
Adaptable Presses | 6 Colors 26/29″ / 6 Colors 32″ / 2 Colors or Less 40″ |
TOP-ONE ECO 402PC
TOP-ONE ECO 402PC is the eco-friendly model that has filtration system combined in as well as enhanced functions best suited for the operation of small-size presses.
It creates high-quality and eco-friendly printing operation.
COSMOTECH consented to the environmental protection printing promotion assembly (E3PA), and this equipment has received attestation as a product corresponding to gold plus.
Features
- High-quality filtration system keeping dampening water clean with no exchange water required
- Powerful cooling effect with high-quality and durable low vibration refrigerator
- Alcohol control, etch solution control and automatic feed water system
- Easy operation with a user-friendly touch screen
- Independently regulated circulating system and filtration system eliminate the need for making press off when replacing filters
- Eco-friendly refrigerant gas (R407C)
Specifications
Name | TOP-ONE ECO 402PC |
---|---|
Power Supply | 3-Phase 200V 50/ 60Hz |
Current/ Capacity | Approx. 13A/ 4.5kVA |
冷却能力(50/60Hz) | 4.9/ 6.0kW |
Refrigerant | R407C |
Circulation Pump | 3-Phase 200V 370W 93L (Pump Head: 5m)/ 52L (Pump Head: 14m) |
Etch Solution Control | Change-over of etch density control mode and the pH monitoring mode |
IPA Control | alcon (Water Surface Detection) |
Filtration Pump | 3-Phase 200V 8~23L/min |
Filter | A+C Filter 5 PCS in Total |
Adaptable Presses | 6 Colors 26/29″ / 6 Colors 32″ / 2 Colors or Less 40″ |
TOP-ONE ECO 502 / 502W
(W … Water Cooling Type)
TOP-ONE ECO 502 is well-equipped and reliable unit for 40″ and 44″ presses.
Automatic etch/ IPA injection, touch screen operation and such “must” functions are equipped.
Dampening solution concentration is controlled by either the etch density control mode or the pH monitoring mode.
There are no screws on the cover plates and it makes cleaning and maintenance easier.
Moreover, if a water cooled type refrigerator is adopted, amount of exhaust heat in a factory can be cut. (In the case of a water cooled type refrigerator, it usually becomes combined use with a roller cooling system. A roller cooling system and a chilling unit are sold separately.)
Features
- The added amount of etch solution is controlled by either the etch density control mode or the pH monitoring mode.
- Since there is no screw on the side covers, they can be easily removed.
- The liquid crystal display shows the operation status clearly.
- The touch screen makes operation easier.
Specifications
Name | TOP-ONE ECO 502 / 502W |
---|---|
Power Supply | 3-Phase 200V Input Breaker 30A |
Current/ Capacity | Approx. 13A/ 4.5kVA |
Refrigerator | Air Cooling Type/ Water Cooling Type 1.99kW |
Refrigerant | R407C |
Circulation Pump | 3-Phase 200V 180/ 250W |
Etch Solution Control | Change-over of etch density control mode and the pH monitoring mode |
IPA Control | Water Surface Detection |
Dimensions | W800×D750×H1470 (mm) |
Adaptable Presses | 4~6 Colors 40″ / 4 Colors or Less 32″ |
TOP-ONE ECO 602 / 602W
(W … Water Cooling Type)
TOP-ONE ECO 602 is a unit for large format and web presses.
It inherited the basic design pattern and functions from “ECO” series. In addition, considering customer’s usability, the top panel is designed to slide open.
Moreover, if a water cooled type refrigerator is adopted, amount of exhaust heat in a factory can be cut. (In the case of a water cooled type refrigerator, it usually becomes combined use with a roller cooling system. A roller cooling system and a chilling unit are sold separately.)
Features
- The added amount of etch solution is controlled by either the etch density control mode or the pH monitoring mode.
- Top panel is designed to slide open.
- The liquid crystal display shows the operation status clearly.
- The touch screen makes operation easier.
Specifications
Name | TOP-ONE ECO 602/ 602W |
---|---|
Power Supply | 3-Phase 200V Input Breaker 50A |
Current/ Capacity | Approx. 22A/ 7.6kVA |
Refrigerator | Air Cooling Type/ Water Cooling Type 3.54kW |
Refrigerant | R407C |
Circulation Pump | 3-Phase 200V 450 W×2 |
Etch Solution Control | Change-over of etch density control mode and the pH monitoring mode |
IPA Control | Water Surface Detection |
Dimensions | W1200×D1000×H1570 (mm) |
Adaptable Presses | 7~8 Colors 40″ / 5~8 Colors 32″ / 5 Colors or Less 50″ / Web Press |